สร้างเว็บEngine by iGetWeb.com
Cart รายการสินค้า (0)

UART 13.56MHZ RFID

UART 13.56MHZ RFID

FOR Arduino PIC MCS-51 AVR ARM

Various host interfaces are implemented on this module:

  • SPI interface
  • Serial UART

Features

  • Highly integrated analog circuitry to demodulate and decode responses
  • Supports ISO/IEC14443A/MIFARE
  • Typical operating distance in Reader/Writer mode for communication to a ISO/IEC14443A / MIFARE is 40~50 mm
  • Supports MIFARE Classic encryption in Reader/Writer mode
  • Supports ISO/IEC14443A higher transfer speed communication up to 848kbit/s
  • Control by Serial UART interface: Baud rate could be 2400bps ~ 115200bps, with default baud rate 9600bps
  • With the chip ISO14443, it supports MIFARE standard encryption algorithm
  • Configuration data is preserved in EEPROM against power cut off
  • Built-in 8K EEPROM, easy to access it by sending commands
  • Easy to use, by sending simple commands users can control it to read or write cards
  • In compact command, command is as short as one byte
  • Excellent EMC performance

Parameter

  • Power Supply: 4.5V~5.5V, typically 5V.
  • Interface: UART (5V TTL) and SPI (3.3V TTL)
  • Size: 40mm x 50mm

Usage

Baud rate could be 2400bps ~ 115200bps

Default setting:

  • Baud Rate: 9600bps
  • Parity bit: None
  • Start bit: 1
  • Data bit: 8
  • Stop bit: 1

There are two kinds of command: Basic command and compact command. All the command are in Hex format. Please download manual for more information.

Connecting with Arduino is pretty easy. With Arduino Sensor Shield, just plug in and play.

 

Dimention

Document

Product list

  1. RFID module x1
  2. MIFARE1 S50 suqare white card x1
  3. MIFARE1 S50 key card x1
  4. FM110 suqare white card (compatible with MF1 S50)
  5. 4-pin wire x1

  ราคา 1450 บาท  (สินค้าหมด) ใครต้องการด่วนโทรแจ้งครับจะเก็บไว้ให้ครับ

view