USB interface / wireless transceiver / CC1101 / long distance / 100 mW / wireless RF module
ตัวนี้สามารถใช้ร่วมกับ RF1100-232 Wireless RF Transceiver Module โดยให้ตัวนี้เป็นฝั่งรับที่ต่อกับ computer หรือจะให้ computerส่งของมูลไปยังRF1100-232 Wireless RF Transceiver Module ก็ได้
Module:
USB-1100PA wireless communication module, high-performance wireless communications using TI\'s CC1101 chip using the 433MHz ISM bands-free license to use, compact, with exquisite shell (USB size), built-in high gain power amplifier circuit transmission distance applicable to build between the PC, and PC and the electronic device between the wireless control system
Module basic characteristics:
(1) 433MHz the open global ISM band is license-free use
(2) The work rate is 250Kbps, efficient MSK modulation, anti-interference ability, particularly suitable for industrial control occasions
(3) multi-point communication and frequency hopping communication needs
(4) Built-in hardware CRC error detection and point-to-multipoint communication address control
(5) Direct USB power, no external power supply
(6) transceiver mode switching time <130us
(7) software addressable only receive the address of the machine will output data (mentioning? unloading now Gan?), Can be connected directly to the PC\'s USB port, the software programming is very convenient
(8) by default, once the transmission of payload data packet size is 32 bytes, the address width of 1 byte, the transmission rate of 250kbps, CRC checking is enabled
(9) provide secondary development package source code and demo programs. Facilitate secondary development, and demonstration program intuitive use of the test module and the communication distance
(10) The internal band power amplifier circuit (gain 20dBm), transmission distance, rate of 250KBPS\'s, the clearings communication distance of up to 300-400MeterIndoor communication is still a good effect, suitable for establishing a PC-PCPC-electronic apparatus, wireless remote control system
(11) supporting the CC1100 series module for my company, to build a wireless remote control system for PC-electronic systems; direct use of data transmission between the PC can
Test demonstrates:
We provide a test demonstration program (PC-PC), the basic workflow simulation module, as well as the test module is good or bad, the wireless communication distance. Method: Turn on the PC the demo software NetUsbDemo4VC6, then the module into the usb port can. You can then enter the data in the input box and click the send button; if the received data is displayed in the reception area:
ราคา 690 บาท สินค้าหมดชั่วคราว