สร้างเว็บEngine by iGetWeb.com
Cart รายการสินค้า (0)

EMG Detector Module

EMG Detector Module

EMG Detector Module

เป็นชุดวัดสัญญาณกล้ามเนื้อ สามารถต่อกับ Arduino หรือ Microcontroller ตัวอื่นๆได้


ราคา 1950 บาท   


ในชุดประกอบด้วย

-  EMG Module

-  สายต่อ

- emg electrodes

EMG detector is a bridge connects human body and electrical, the sensor gathers small muscle signal then process with 2th amplify and filter, the output signal can be recognized by Arduino. You can add this signal into your control system. Note: The sensor cannot be used for medical purposes.
In standby mode, the output voltage is 1.5V. When detect muscle active, the output signal rise up, the maximum voltage is 3.3V. You can use this sensor in 3.3V or 5V system.
 
Features: 
  • Grove Compatible 
  • 3.5mm Connector
  • 6 Disposable Surface Electrodes
  • Power supply voltage: 3.3V-5V
  • 1000mm Cable Leads
  • No additional power supply
 
Move 
When finish downloading demo code, it'll take about 5s to initialize, you should keep static when initializing.
You can see that when initializing, the Led Bar will go form level 10 to level 0. When Led Bar All off, you can move now. 
When you are moving, you can find that the level of Led Bar will change. 
 
 
Resource
 
Documents
Please visit our wiki page for more info about this product. It will be appreciated if you can help us improve the documents, add more demo code or tutorials. For technical support, please post your questions to ourforum.

 

view